Pavement Marker Peel And Stick Butyl Pad, 4" x 4"

Pavement Marker Peel And Stick Butyl Pad, 4" x 4"

Commercial Highway Grade.

• Measurements: 4" x 4"
• Weight: 1.4 ounces.

These pads are used to attach to 4"x4" pavement markers, and then be installed to asphalt or concrete.

These pavement markers can be installed extremely easily.  No more glue, or epoxy mixing.  Just peel off the white backing and stick to the asphalt or concrete surface.

Each Package Includes: (1) Butyl Pad Attached To Rough/Sand Backing

How To Install:

• Peel One Side, Attach To Pavement Marker, Peel Other Side, Attach To Ground.
• Place pavement marker firmly on the ground horizontally. Step on pavement marker to affix firmly.

*** DO NOT install on wet or loose road surfaces such as gravel, sand, dirt, or mud as they will not stay down.  Must be installed on DRY surfaces. 

 WARNING:
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov