Lansdale Valve 4" Lever & Weight Swing Check Valve - 700-225-02405

Lansdale Valve 4" Lever & Weight Swing Check Valve - 700-225-02405

Swing Check Valves are used to prevent the back-flow of water within a piping system. They come with and without an outside Lever and Weight which conforms to AWWA C508. In order for a check valve to properly function there should be a differential pressure of at least ½ PSI, this will prevent water hammer and chatter.

FEATURES

• Resilient seated (EPDM rubber face on the ductile iron disc)
• Bronze seat ring 
• “Full Waterway” design per AWWA C508 Standard
• Fusion bonded epoxy powder coated - certified to NSF/ANSI-61 for use in drinking water systems
• Fusion bonded epoxy coated Interior and exterior per AWWA C550 Standard
• Working pressure rated at 200 PSI
• Flanged ends to ANSI B16.1, Class 125
• Temperature range: 33° F to 170° F
• May be installed vertically or horizontally for vertical installations, flow must be in upward direction

SPEC SHEET

 WARNING:
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov