Fire Hydrant Pavement Marker Blue Dot Kit, 2-Way, With Peel And Stick Butyl Pad, 4" x 4"

Fire Hydrant Pavement Marker Blue Dot Kit, 2-Way, With Peel And Stick Butyl Pad, 4" x 4"

Commercial Highway Grade Prismatic Retroreflective Pavement Marker, Blue, BB

Measurments:

• 4" x 4"
• Weight 10 ounces

These pavement markers can be installed extremely easily.  No more glue, or epoxy mixing.  Just peel off the white backing and stick to the asphalt or concrete surface.

Markers consist of an ABS plastic shell filled with a tightly adherent potting compound. The shell contains two glass covered prismatic retroreflective faces as required to reflect light from opposite directions.

Each Package Includes:

• (1) Commercial Grade Apex 2-Way Blue Reflective Pavement Marker With Butyl Pad Attached To Rough/Sand Backing

How To Install:

1. Clean surface to ensure no loose debris (Concrete or Asphalt Only)
2. Remove pavement marker from plastic packaging
3. Peel white film off to expose butyl pad surface
4. Place pavement marker firmly on the ground horizontally
5. Step on pavement marker to affix firmly

*** DO NOT install on wet or loose road surfaces such as gravel, sand, dirt, or mud as they will not stay down.  Must be installed on DRY surfaces. 

Meets Multiple Agency Requirements:

• California DOT Department of Transportation
• California HCD Housing And Community Development Title 25 Private Fire Hydrant Test And Certification Report 
  • Part 3, Annual Fire Hydrant Operation Test, Item 6
    • Each Hydant Is Clearly Identified or Marked

 WARNING:
This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov